Posts Tagged ‘Configuration’
It is a little known fact that Windows 7 doesn’t use the entire available RAM by default. For example if you have 8GB of RAM and a 64-bit Windows 7, it will use around 7.1GB of it (in the case of 4GB of RAM and 32-bit Windows 7, it will use around 3.5GB). The reason for this behavior is not completely known, but it is quite possible to alter it – to force Windows 7 to use all available RAM.
How do we do this? First, open the Start menu and enter msconfig in the start search box:
and hit Enter. The System Configuration window will open:
Navigate to the Boot tab:
Click the Advanced options button. A new window will open:
In the BOOT Advanced Options window check the Maximum memory option:
Click OK to close the boot options dialog and another OK to close the System Configuration window.
Restart your computer for the changes to take effect:
In the previous articles we”ve coved the installation of Bacula. In this one we will cover basic configuration, based on the installation locations we used before. If you have not read them I recommend that you pay a visit
Bacula consists of 3 parts – Director, Storage Daemon and File Daemon + additional 4th part GUI tools. Before we can use any of those we need to create the Catalog – MySQL db in our case. To do so we need to follow next 4 steps.
1. cd /usr/local/bacula/etc
To verify that all was completed successfully login in mysql server with administrative user and execute the following command :
mysql> show grants for bacula@localhost;
Output should look like this:
Read the rest of this entry »
This manual aims to describe the procedure for installing and configuring a tapeautoloader device with Bacula software.
For the purposes of this manual we used 1/8 G2 Autoloader HP autoloaders. These are devices that simple change and label the tapes inside them. Each device can accommodate up to 8 tapes LTO-3, with capacity of 800-1600GB per tape. The autoloader is attached via iSCSI cable to the storage server. In our setups, this will be the server attached to the autoloader
Autoloader – it has pretty neat GUI interface accessible through a web browser. All you have to do is configure an IP address for the autoloader and access it through your browser. Configuration can be done from the buttons at the front panel of the autoloader. For more details, refer to its documentation.
Once you”ve attached the autoloader and the storage server”s OS has been installed, make sure that you”ve loaded the sg driver Read the rest of this entry »