Not sure why I added in the title remotely because I'm absolutely positive that you know how to the HP Proliant server serial number when you are at the server room.

hplog utility is provided by the HPASM (HP Advanced Server Management) package offered by [url-http://www.

HP MSA2012i storage can be configured via web GUI(SMU) or cli (Serial port connection or telnet). In HP MSA2012i - iscsi storage General Config Initial Setup Guide and HP MSA2012i - iscsi storage Virtual Disk Config Initial Setup Guide I have shown you how to configure it using the web interface.

In this tutorial we will continue the guide how you can make your initial configuration of your new HP MSA2012i storage.

HP MSA2012i storage can be configured via web gui(SMU) or cli (Serial port connection or telnet). In this tutorial I will show you how you can configure your HP MSA2012i storage via SMU.

The tutorial applies for general server configuration. Most of the settings used are the way they are just as a result of long years of experience for specific needs.

The tutorial applies for general server configuration. Most of the settings used are the way they are just as a result of long years of experience for specific needs.

In the previous articles we've coved the installation of Bacula. In this one we will cover basic configuration, based on the installation locations we used before.

In previous two tutorials we managed to get Bacula Software installed on our system. If you have missed the two previous articles I recommend to pay a visit to them.

We continue the manual for Using Bacula with HP autoloaders. In case you have missed the first part I recommend that you read it here Using Bacula with HP autoloaders | Basics Bacula uses 3 types of database servers, PostgreSQL, SQLite, Mysql to store it's catalog tables.

This manual aims to describe the procedure for installing and configuring a tapeautoloader device with Bacula software.

Recently I had problems with two of the servers I support because of DDoS attacks in the datacenter. Then I needed some load average reports for these servers, a script to inform me or directly to stop the network service if heavy pressure is taken.

With few steps I will show you how to update missing Urchin statistics, or just to update them from the web server access logs.